#56, 277 - Mercedes M119.97X Engine wiring Harness Connection Sheet
This sheet will help you to check all plug connections form end to end.
#82 & 137 - Mercedes R129 SL280 & SL320 Ignition coil configurationIgnition coil configuration
Configuration of connectors to the ignition coils: Mercedes lists the wiring harness A1405406932 as a successor of the A1405400732. These two are identical except the ignition sequence. You can use the following scheme to connect the plugs in accordance with the original wiring harness installed in the vehicle.
#350 - Plug Hot Film Air / Mass Air Flow Sensor (replaces OE A1405400081)
Pin assignment on the mass air flow sensor connector: The pin assignment and colors are based on the color scheme of vehicles with mass air flow sensors (LH-Jetronic). However, this cable set can also be used for vehicles with HFM control. The wire on pin #3 is not required for this. The color scheme of our wiring harness does not correspond to the wiring colors in HFM vehicles.
#543 - Plug Throttle Body 8-Pin, 13-Pin, 14-Pin
Pin assignment for throttle body repair cable. This pin assignment indicated which cable colors and cross-section connect to the electric motor and the board inside the throttle body.
#545 - Plug Throttle Body 8-Pin for wiring harness repair (OE A1405403381)
Pin assignment in connector; This pin assignment sheet helps to determine the cable color to each pin in the connector housing.
#549 - Plug Temperature Sensor 4-pin (OE A1265403081)
This pin assignment indicated how cable colors are arranged in the housing.
#604 & 923 - Repair Wiring Harness Air Mass Sensor M120 engine
Pin assignment on the M120 main connector: this pin assignment table is used to connect the repair wiring harness to the two main connectors in the control unit box. These instructions apply to the R129 as well as to the W140, as both have an almost identical control unit box.
#1330 - Mercedes W124 immobilizer deactivation delete device
Installation Instructions